- Overview
- Product Description
- Company Profile
Basic Info.
Product Description
Product Specification
| STANDARD SIZE | THICKNESS | WEIGHT/PC | QTY/20FT | QTY/40HQ |
| 2440*1220MM | 12 MM | 21 KGS | 560 PCS | 1260 PCS |
| 2440*1220MM | 15 MM | 24 KGS | 450 PCS | 1026 PCS |
| 2440*1220MM | 18 MM | 28 KGS | 400 PCS | 900 PCS |
| 2440*1220MM | 20 MM | 30 KGS | 250 PCS | 800 PCS |
Cutting and customized size are available.
Product Advantages
1. Durable, the reusable time can reach more than 60 times, long service life.
2. No absorption of moisture, no deformation, no mildew; Long-term immersion stratification in the water,
no bubbles, sheet size stability, especially suitable for underground and damp environment.
3. Demould easily. No need brushing release agent, only tapping, the formwork will fall off. Shorten working
hours and speed up the construction schedule efficiently.
4. Easy to process. Sawing, drilling and nailing are all available. Formworks can be combined vertically
and horizontally optionally.
5. Light weight, high strength, high hardness, impact resistance, wear resistance.
6. Surface is smooth, bright and clean; concreting and forming effect is good.
7. Good toughness. It could be used as cambered special-shaped formwork.
8. Acid and alkali resistance, corrosion resistance; Very suitable for the engineeringapplication in
coastal areas, mine, as well as seawall. It is need not do any preservative treatment both in using and
storing the formwork, which do not pollute the concrete surface.
9. Waste products can be recycled and reprocessed, making full use of waste materials. This property
can greatly reduce the project cost compared with wooden formwork and bamboo formwork.
10. Environmental protection and energy saving, no pollution. No any poisonous or harmful gas.
11. Easy to remove. Removing is convenient, quick and safe, and the supporting is also easy to operate,
advantageous to the organization construction, effectively improving the construction schedule.
Product Application
thickness of slab concrete is less than 15cm, the timbers distance should be 350-400mm. If the thickness of slab
wall is adjusted by the height and thickness of the wall. For example, the wall is 2800 mm high and 300 mm thick,
timbers distance should be 200-250 mm with 18mm thick plastic formwork. If the shear wall width or the pillar is
thick more than 1m, must add the fixed frame.
angle (the bottom of the wall) beam to insure the beam frame, wall and formwork connect well. For shear wall,
labor intensity, as well as improve the forming effect.
strength of driving in nail should be moderate; length of nails should be 40-50 mm, not too long or too short.
allowance of wood square, thus can ensure no leakage of slurry and save wallboard material efficiently.
is better. Normally, there is no space between formworks, but if the temperature difference is 5-10 ºC , then should
reserve 1-2mm gap.
Product Using Feedback
Beizhu Plastic Formwork Company
Beizhu Plastic Formwork Company was founded in 2008, is located in Suqian City,which is one of the
largest manufacturers of construction plastic formwork in China. Beizhu has production area about 12000
square meters, 5 production lines and 100 workers.
The construction plastic formwork has been exported to Finland, Canada, Australia, Russia, Ukraine, Kenya
Thailand, Korea and so on. Now Beizhu has 2 agents in Turkey and Thailand.
In 2013 year,Beizhu adopted the Certificate of ISO9001:2008 International Quality Management System.
Beizhu keeps long-term cooperation with all the customers all over the world.
